- trakeyCar® apps
- trakeyCar® DS612
- trakeyCar® web
New iOS and Android mobile apps for trakeyCar DS612.
New line of security systems for vehicles Combines a Vehicle Security Systems and GSM/GNSS (Global Navigation Satellite System) notifications with online tracking platform and mobile apps for iOS and Android.
The DS612 is a device that combines function of a GSM-GPRS pager, stand-alone Vehicle Security System (VSS), passive immobiliser and anti-hijack device (only where the reg.97 UN ECE does not apply).
The general purpose of DS612 installed in a vehicle is to notify this vehicle users through trakeyCar apps or trakeyCar platform on any theft attempt on vehicle.
The DS612 is equipped with external GNSS receiver. This allows to receive vehicle GNSS position in the form of latitude and longitude. The trakeyCar notification also includes a link to online maps which can be opened in any web browser to visualise vehicle position.
The DS612 can work without alarm function (VSS) - without optical and acoustic signalisation of alarming. The device works as a GSM-GPRS pager that monitors OEM CAN-bus security system or any third party or OEM analogue security system, already installed in the vehicle.
Dedicated online web platform for trakeyCar® DS612 https://system.trakeycar.com/
- Tytan®GPS
- Tytan®GPS DS512 Alarm
- Tytan®GPS DS511 Pager
Dedicated mobile application for Android and iOS allows to operate Tytan®GPS DS511 and Tytan®GPS DS512. Friendly interface allows to send lock/unlock commands to the vehicle, request GPS position and status of car, allows to control external heaters and has a built-in parking meter counter. More details HERE.
Tytan®GPS DS512 was designed to operate as a complete CAN-bus security system integrated in a single unit with a GSM-SMS pager. It can be equipped with external GPS module that allows to check the vehicle localisation. Tytan®GPS DS512 can be controlled with SMS commands sent from any mobile phone. It can also operate as GSM-SMS Pager (with optional GPS) monitoring any Vehicle Security System already installed in the vehicle - either CAN based OEM VSS or aftermarket VSS. More info HERE.
Tytan®GPS DS511 was designed to operate as a GSM-SMS pager. It can be equipped with external GPS module that allows to check the vehicle localisation. Tytan®GPS DS511 can be controlled with SMS commands sent from any mobile phone. It can also operate as GSM-SMS Pager (with optional GPS) monitoring any Vehicle Security System already installed in the vehicle - either CAN based OEM VSS or aftermarket VSS. More info HERE.
- Tytan® DS700
Tytan® DS700 is an immobiliser with optional anti-hijack function. The device is equipped with Bluetooth module and can work with GPS/GSM localization devices. More details cen be found HERE.
- Tytan® DS410
Tytan® DS410 car alarm is designed for all modern vehicles equipped with Controller-Area Network (CAN-bus). It provides with all the essential built-in functions needed to protect your car, as well as with a number of additional functions designed to improve comfort of the vehicle operation. The car alarm can be controlled by factory remote control (OEM remote transmitter) in addition to Tytan® remote control. It can be equipped with additional remote transmitters and authorisation tokens.
Main features of Tytan® DS410:
- door / trunk / bonnet open warning when arming
- signalisation if the alarm was triggered when disarming of the system
- trunk release button logic
- state of the system is memorised in non-volatile memory and is preserved during power-off
- built-in ultrasonic motion detector (option)
- system can be armed without ultrasonic motion detector and additional sensors e.g. shock sensor. the reason of 5 previous alarms is kept in system memory
- coded emergency override procedure (without remote transmitters)
- REARMING feature - if the VSS was armed and neither doors nor trunk would be opened within the specified time after disarming, it would be treated as accidental operation. The VSS reacts, by arming again
- detection of OEM security system alarming (applicable to some car models)
- CAN bus hazard lights, windows roll-up and central door locking control (applicable to some car models)
- configuration and upgrade of the VSS firmware via USB and free PC software
- Tytan® DS300R PLIP
- Tytan® DS300P RX
- Tytan® DS200P
The Tytan® DS300R is a high quality car alarm for vehicles with a central lock remote control. This alarm can also be controlled by Tytan remote transmitters. No need for an additional remote control makes this car alarm very popular among customers. Failure-free and long-term operation is guaranteed by specialized software for every car make.
Tytan® DS300R car alarm has two ignition locks (internal and external) and an ultrasonic sensor. Individually programmable emergency disarming PIN system allows to reach the destination even in case of the factory remote control damage. The car alarm can be controlled by factory remote control (OEM remote transmitter) in addition to Tytan remote transmitters.
Features of Tytan® DS300R:
- central lock control
- internal ignition lock
- anti-burglary function
- anti-hijacking function
- "panic" function
- sunroof and windows closing
- coded emergency system disarming
- additional sensor input
- external wireless notification output
- built-in ultrasonic sensor (optional)
- immobilizer
- adjustable comfort function time
- adjustable central lock impulse mode
- input polarization defining
- open door signalization
- intelligent self-arming
- memory of the last three alarm sources
- maintenance-free anti-burglary function
- garage mode option (identifies when the car is in the garage)
- electronic indicators protection
- alarm activation without interior protection activation (ultrasonic sensor disabled)
- external ignition lock output
- configuration of the VSS via DSX programming wire and free PC software
Tytan® DS300P is a high quality car alarm designed for even the most demanding customers. One of its greatest assets is flexibility of functioning which makes the operation almost "intuitive". Modern technology of workmanship and functionality put Tytan® DS300P among market leaders of car alarm systems.
The device is controlled by wireless by means of two functional Tytan® remote controls and has two ignition locks (internal and external) and an ultrasonic sensor. Individually programmed emergency disarming PIN system allows to reach the destination even in case of the remote control damage. Any kind of Tytan® remote transmitters can be used with Tytan® DS300P.
Features of Tytan® DS300P:
- central lock control
- internal ignition lock
- anti-burglary function
- anti-hijacking function
- intelligent pre-alarm
- "panic" function
- sunroof and windows closing
- automatic arming
- coded emergency system disarming
- additional sensor input
- additional control channel
- external wireless notification output
- built-in ultrasonic sensor (optional)
- immobilizer
- adjustable comfort function time
- adjustable central lock impulse mode
- adjustable additional channel impulse mode
- input polarization defining
- open door signalization
- intelligent self-arming
- memory of the last three alarm sources
- maintenance-free anti-burglary function
- garage mode option (identifies when the car is in the garage)
- remote control of alarm condition
- electronic indicators protection
- alarm activation without interior protection activation (ultrasonic sensor disabled)
- acoustic signal of reversing
- external ignition lock output
- configuration of the VSS via DSX programming wire and free PC software
Tytan® DS200 car alarm belongs to the most popular Tytan® car alarms due to its reasonable price and good quality. Basic functions of Tytan® DS200 allow to protect the vehicle from intruders. The car alarm is also equipped with a built-in lock and an output for an extra sensor (ultrasonic sensor, GUARDIAL digital tilt sensor, etc.). Any kind of Tytan® remote transmitters can be used with DS200P.
Features of Tytan® DS200P:
- central lock control
- internal ignition lock
- "panic" function
- sunroof and windows closing
- coded emergency system disarming
- additional sensor input
- adjustable comfort function time
- adjustable central lock impulse mode
- open door signalization
- memory of the last three alarm sources
- garage mode option (identifies when the car is in the garage)
- electronic indicators protection
- alarm activation without interior protection activation (optional ultrasonic sensor disabled)
- configuration of the VSS via DSX programming wire and free PC software
- Tytan® DS450 Translator
- Tytan® DS453 PDC controller
- Tytan® DS454 Cornering lights
- Tytan® DS459 Speed controller
- Tytan® DS456 CDL controller
The Tytan® DS450 interface helps to install all 1 way and 2 way car security systems in cars with CAN-bus. The interface is a microprocessor based device for acquisition of various signals from vehicle CAN-bus network. The signals are: door, trunk and bonnet switches status, ignition switch status, lock / unlock commands of OEM remote control, OEM alarm detection, and more. Moreover in certain vehicles, the device can control the vehicle electric systems via transmitting CAN bus signals to the car, it can operate the central door locking system, release the trunk, control the hazard lights and roll-up the window.
Main features of Tytan® DS450:
- 2 high current positive outputs (programmable)
- 2 inputs / low current positive outputs (programmable)
- 8 inputs / low current positive / negative outputs (programmable)
- detection of can-bus status signals
- CAN bus hazard lights, windows roll-up and central door locking control(applicable to some car models)
- very small dimensions
- configuration and upgrade of the VSS firmware via USB and free PC software
The Tytan® DS453 is a device that intelligently controls power supply (+12V, up to 10A) of the aftermarket (additional) front and rear parking sensors on the basis of the signals read from digital CAN-bus vehicle network. The parking sensors are enabled if the ignition is switched on and the configured conditions are met. The rear parking sensor is switched on if the reverse gear is selected. The front parking sensor is switched on and off depending on the vehicle speed, according to several programmed parameters:
- switch ON speed (Von),
- switch OFF speed (Voff),
- hold-on time (V>Voff),
- switch-off time (when V=0km/h)
- and the operation mode when ignition is switched on.
The Tytan® DS453 parameters as well as make and model of the vehicle in which the device is installed are programmed by a dedicated DSX software on a PC computer with a mini USB cable.
Tytan® DS454 controls additional static cornering lights on the basis of CAN bus signals. The cornering lights are enabled when direction indicator is switched on for at least 1 second (if ignition is switched on).
In most vehicles, the cornering lights can be activated when speed is lower then 40km/h, to do so, the "cornering lights active at speed < 40km/h" option have to be selected.If the choosen vehicle do not have the CAN bus speed status, only the "cornering lights active at every speed" can be choosen. When this function is selected, the cornering lights can be activated at every speed. If the "outputs for bulb circuits" option is selected, the lights fade-in and fade-out softly. If the "outputs for relay control" is selected, the output signals switch on and switch off, to control external relays.
Tytan® DS459 device enables intelligent buzzer output control in order to inform the driver about exceeding the reference speed limit while driving. The device reads speed signals from digital CAN-bus vehicle network or analogue speedometer signal. Starting the buzzer occurs when the speed is greater than the programmed overspeed threshold. The moment of buzzer switching on and off can be programmed using additional parameters such as: overspeed threshold hysteresis, overspeed signalisation, signalisation of overspeed delay. The parameters and both the make and model of the vehicle which the device operates in, are configured with dedicated software PC using the mini USB cable
Tytan® DS456 allows to control the central door locking system over vehicles CAN-bus. It was designed to improve the installation time of analogue security systems in cars that may be controlled with CAN-bus signals.
- Remote transmitters
- Sirens
- Sensors
- Additional modules
- PnP wire harness
We offer few types of Tytan® remotes transmitters that can operate with all of our devices.
List of remote transmitters can be found HERE.
We offer several types of sirens to be equipped with our security systems: analogue sirens, digital sirens, with backup battery, simple horn sirens and for 24V applications.
More details HERE.
Many types of additional sensors may bo connected to Tytan security systems. We manufacture Guardial Ultrasonic Sensor and Guardial Digital Tilt Sensor.
More details HERE.
We offer two types of additiona modules for our security products.
The RF module is an external radio frequency module that allows to use addntional Tytan® remote transmitters with Tytan®GPS DS512 and Tytan® DS410 CAN-bus alarms. It is installed simply by enabling the RF module in the Tytan® DS512 or Tytan® DS410 programmer and plugging it to the rear 3-pin connector in Tytan® DS512 wite harness or Tytan® DS410 main unit. In some cars the door locks are controlled over CAN-bus, no need to make any additional analogue connections.Any kind of Tytan® remote transmitters can be used with RF module.
The AUX module for Tytan®GPS DS511 and Tytan®GPS DS512 was designed to control e.g. parking heater, trunk release, vehicle lights - (implementing coming home (when arming VSS) and leaving home (when disarming VSS). The module output can be enabled constantly or for a given period of time (1 second - 999 minutes), via SMS command or smartphone application. The output is disabled after given amount of time or after the dedicated command. The possibility to use AUX output in a given vehicle must be consulted with installer before starting instalation of Tytan®GPS.
On special request we can provide our security systems with PnP wire harness. The dedicated wire harness does not require soldering when connecting Tytan® security systems. Currently we have in oir offer dedicated for Toyota, Peugeot and Citrone cars.
- RX controllers
- Immobilisers
Professional central door locking controller Tytan® DS101 is a universal and very easy to use module. It's a programmable device that locks and unlocks vehicles central door locks with remote transmitters. Locking and unlocking is signalised with hazard lights. Four button hopping code remote transmitter have additional channel for comfort function or trunk release.
Our alarm security systems have the necessary functions to immobilise the vehicle. Starting with basic immobiliser, through anti-hijack systems (available only on certain markets) up to systems protecting against cloning of OEM remote transmitters that protect against Keyless range extend theft attempts. CONTACT US for detailed information.
- Tytan® DS424
Tytan® DS424 car alarm is designed for vehicles with 24V electric instalaltion equipped with Controller-Area Network (CAN-bus). It provides with all the essential built-in functions needed to protect a vehicle, as well as with a number of additional functions designed to improve comfort of the vehicle operation. The unit can be controlled by factory remote control (OEM remote transmitter) in addition to Tytan® remote control. It can be equipped with additional remote transmitters and authorisation tokens.
Main features of Tytan® DS424:
- door / trunk / bonnet open warning when arming
- signalisation if the alarm was triggered when disarming of the system
- trunk release button logic
- state of the system is memorised in non-volatile memory and is preserved during power-off
- built-in ultrasonic motion detector (option)
- system can be armed without ultrasonic motion detector and additional sensors e.g. shock sensor. the reason of 5 previous alarms is kept in system memory
- coded emergency override procedure (without remote transmitters)
- REARMING feature - if the VSS was armed and neither doors nor trunk would be opened within the specified time after disarming, it would be treated as accidental operation. The VSS reacts, by arming again
- detection of OEM security system alarming (applicable to some car models)
- CAN bus hazard lights, windows roll-up and central door locking control (applicable to some car models)
- configuration and upgrade of the VSS firmware via USB and free PC software
- Tytan®SAT Devices
- GPS tracking platforms
- Accessories
Tytan®SAT DS520
real-time tracking device
GSM/GPRS device designed for tracking vehicles and cargo or supervising technical objects in real time. It is intended for passenger, construction, money transport and agricultural vehicles, buses, trucks, etc. DS520 communicates with server via GSM network. It transmits GPS data (position, speed) and current parameters and events registered in the monitored object. In case GSM signal is lost, DS520 has the built-in event log memory. It can hold approx. 50000 reports, covering approximately 85 hours of normal use. In order to work when power supply is lost, DS520 requires external battery with buffering circuit.
Tytan®SAT DS540
real-time tracking device with CAN-bus
GSM/GPRS device designed for tracking vehicles and cargo or supervising technical objects in real time. It is intended for passenger, construction, money transport and agricultural vehicles, buses, trucks, etc. The device communicates with server via GSM network. It transmits GPS data (position, speed) and current parameters and events registered in the monitored object. Due to built-in input and interfaces (CAN) DS540 can supply the following data: fuel level, fuel consumption, engine rpm, engine load and temperature, tachograph data, door/trunk/bonnet status, OEM remote locking and unlocking of the vehicle, triggering vehicle OEM alarm. Due to RS485 port the device operates with fuel level sensors of various FLS producers. In case GSM signal is lost, DS540 has the built-in event log memory. It can hold approx. 50000 reports, covering approximately 85 hours of normal use. In order to work when power supply is lost, DS540 requires external battery with buffering circuit.
More details HERE.
Our Tytan®SAT GPS tracking devices are integrated with well-known Polish and international GPS tracking systems. Wialon, GPSGate, Tytan®SAT, Globtrak, GPS-server, Abbotrack and other. The choice is yours where you will track your vehicles.
More details HERE.
We offer several accessories for fleet management: fuel level sensors designed for fuel consumption measurement in fuel tanks of motor vehicles and technical objects, iButton reader (connected to GPS tracking device) is fitted on the dashboard and each driver simply 'logs on' with his uniquely coded driver ID before he begins the journey and temperature probes equipped with DS1820 digital thermometers are mounted i.a. in livestock trucks using 1-Wire network.